Creep Tester GT-7049-DH4

This instrument is designed to measure the creep and stress relaxation of plastic material under temperature from 0℃ to 50℃.
A) With a specified temperature, preload a given stroke (0 to 30mm) to the specimen. Then, compress the specimen under a constant stroke for a period for time. Meanwhile, measure and record the change in force and time.
B) With a specified temperature, preload a given force (0 to 10kN) to the specimen. Then, compress the specimen under a constant force for a period of time. Meanwhile, measure and record the change in stroke and time.

หมวดหมู่: Creep Testers, Gotech Testing Machines, Material Testing Machines

คำอธิบาย

Creep Tester GT-7049-DH4

Item	Specification
Capacity	10kN
Load Accuracy	±0.5%
Stroke	0.001～30.000 mm
Stroke Accuracy	0.01mm（magnetic railings ruler）
Preload Spee	1.0mm/min
Specimen Thickness	T=1.0～5.0mm
Test Temperature	0.0～-50.0℃
Temperature Accuracy	±2.0℃
Temperature Uniformity	+/-1.0%（F.S）
Control System	PLC control & HMI system
Temperature Control	BTC control system / P.I.D and SSR
Freezing System	Hermetic compressor, cascade system and eco-friendly refrigerant
Cooling Method	Air cooling
Heating System	Hot air circulating system
Outer Surface	Staneless varnish
Heat Preservation Material	Hard foam
Observation Window	Vacuum insulated glass window (5 layers) with lighting
Dimension (W×D×H)	105×89×166cm
Power	1∮, 220V , 50/60Hz

* Specification and content are subjected to change without notice.